Price List

Weston Instruments is a full service shop. Wether you're looking for a simple fret dress, or a new top for your acoustic, it all gets done here. It is impossible to have a complete price list, so please enquire if you're looking for something that isn't listed here.

The shop is a distributor for the following product lines:

Seymour Duncan, K&K pickups, Planet Waves, D'Addario, Elixir, AllParts, BlazeMusic (tone-pros, Floyd Rose, etc.). Parts are only sold in conjuction with services.

This is a list of our most comonly performed services. As you have seen on this website, almost anything can be done at Weston Instruments. If the service you are looking for is not listed here, we will need to see the instrument in order to provide an estimate. You're welcome to come by the shop anytime during our business hours, and estimates are free. Repairs that aren't a fixed price service are priced based on our 100$/H bench rate. Our minimum bench charge is 75$.

Strings and parts can only be sold in conjunction with our services

Guitar Strings:

D'Addario XL series: 7.50$ a set

D'Addario EJ series, acoustic strings: 9$ a set

Elixir Electric: 17$ a set

Elixir Acoustic: 24$ a set

Bass guitar Strings: Please enquire

Standard Setup:

Click here for details on setups

Electric guitar: 110$
Electric guitar with floating bridge: 160$
Acoustic instruments: 110$

Electronics:

Pickup installation and electronics:

Electronics works is billed by the hour, at 100$/h. Over the years, I have found this to be the fairest way to manage this type of work. Most common electronics tasks can be completed within one hour at the bench. Things like swapping pickups, pots and switches. Of course, custom wiring, and working in semi-hollow and hollow electric guitars are more time consuming projects. We are also more than comfortable routing guitars to fit electronic components that would not fit the instrument otherwise. An estimate will always be given to you before any work is started.

Fretwork:

Fretwork is now done with the assistance of a Plek machine, this allows perfect action to be achieved, since all distortions caused by string tension are levelled out. Frets are then finished to 3600G. A fret dress done in this fashion is 250$, which includes a complete setup. A jewel finish is available, price depends on the fret size and material. The frets on the guitar need to be well seated in the fingerboard. This isn’t usually a problem on the higher end instruments, but glueing frets in prior to the fretwork being performed is necessary at times. If this is the case on the instrument being presented there will be a fee of 50$ to glue in the frets. This service can make even the cheapest of beginner instruments play like a dream, and will definitely elevate your journey as a musician.

Re-frets:

Refret prices vary, depending on the condition of the specimen at hand. Several books could be written on the subject, and no factors set a constant difficulty level. As an example, an old Les Paul Custom, with a worn ebony fingerboard and binding, will be more time consuming to refret than a maple board strat from the '70's, even if refinishing is involved. When it comes to vintage instruments, there are many variables that will affect the time required to achieve the same result as on a recent instrument, and the price will vary, based on those factors. Things like a vintage T bar Martin, or a Gibson with truss rod limitations are an example of these factors. An estimate will be provided when you bring such an instrument in for a refret. I work with all fret materials and sizes. For a basic idea, a complete refret will vary between 600$-750$ in the vast majority of cases and up to 900$ in the most complex situations. Refrets do include a complete instrument service, new bone nut in all cases, and a new bone saddle on acoustic guitars.

Complete restoration and Finish work:

Quoted on a per job basis. Please bring in you guitar for an estimate. We work with traditional Nitrocellulose lacquer and UV cured Polyester. We only offer finish work in the context of repair, or when finishing new components. We do not offer a complete re-finishing service (stripping, prepping and refinishing)

Nuts and Saddles ( add material cost to theses prices):

Guitar, Bass, banjo and mandolin nuts: 100$

Installation of pre-fabricated nut: 15$ *This must be accomplished at the same time as a setup in order to properly adjust the new nut*

Acoustic instrument saddles: 75$

Compensated acoustic instrument saddles: 100$

Bridge re-glue:

When the bridge on an acoustic guitar starts to lift, either from a failed glue join, or poor climate control, it has to be removed from the guitar, the surfaces cleaned and matched and then re-glued. The time consumption of this process varies from guitar model and manufacturer. The smoother ones, which are the majority, are completed in about 2 hours of bench time, which is 200$, while the mode complex situations can consume as many as 4 hours, which is 400$. Complex situations are, as an example, a strongly deformed top, bridge, or both. Needing to repair the bridge plate and top as well, etc.

Neck resets:

For the time being, I am only accepting neck resets on C.F. Martin Guitars and Taylor guitars. Older Taylor guitars don’t have the modern shim system known as NT, and a neck reset on those older models is usually 300$, plus setup. Resets on Martin Guitars very between 500$-600$, plus setup. Neck resets on newer Taylor guitars, which have the NT neck joint, are 50$, plus setup

Structural repairs, Vintage Restorations, customizations:

Please, bring in your guitar for an estimate. I have extensive experience in complex repairs, vintage restorations and customizations, but these projects are all different and prices can vary greatly. Costs are always based on our bench fee of 100$/h. You can see some samples of these works on my Facebook Page.